Having a garage door keypad is a convenient way to enter your garage without needing a remote or a key. However, there may come a time when you need to reset your keypad code—whether it’s due to forgetting the current code, moving into a new home, or simply wanting to enhance security. Fortunately, resetting your garage door keypad code is a straightforward process that you can easily do yourself. In this guide, we’ll walk you through the steps to reset your garage door keypad code.
Step 1: Prepare Your Tools and Equipment
Before starting, make sure you have the following:
Access to your garage door opener motor unit (typically mounted on the ceiling of your garage)
A ladder (if your motor unit is out of reach)
The user manual for your specific garage door opener model (if available)
Step 2: Locate the Learn Button
Most garage door openers have a “Learn” button on the motor unit. The location and color of this button can vary depending on the manufacturer. Common colors for the Learn button include red, orange, yellow, green, or purple. Here’s how to find it:
Climb the Ladder: If necessary, use the ladder to reach the motor unit.
Inspect the Motor Unit: Look for the Learn button on the side or the back of the motor unit.
Step 3: Clear the Old Code
To reset your keypad code, you first need to clear the existing code from the motor unit’s memory. Follow these steps:
Press and Hold the Learn Button: Press and hold the Learn button for about 6 seconds until the indicator light turns off. This action clears all remote control and keypad codes from the memory.
Release the Learn Button: Once the light is off, release the button. Your opener is now ready to accept a new code.
Step 4: Enter the New Code
Now that the old code is cleared, you can program a new code into the keypad:
Activate the Learn Mode: Press the Learn button on the motor unit once. The indicator light will turn on and stay on for about 30 seconds.
Input the New Code: Within those 30 seconds, go to your keypad and enter your desired new code (usually a 4-digit number).
Confirm the Code: Press the Enter button on the keypad. The motor unit’s lights should blink, or you might hear a click sound, indicating that the new code has been accepted.
Step 5: Test the New Code
To ensure everything is working correctly, test the new code:
Close the Garage Door: If it’s not already closed, use the keypad to close the door.
Re-enter the New Code: Enter the new code and press Enter. The garage door should open.
Troubleshooting Tips
Check Batteries: If the keypad isn’t responding, check the batteries and replace them if necessary.
Consult the Manual: If your keypad model has specific instructions, refer to the user manual.
Seek Professional Help: If you encounter any issues or the process doesn’t work, consider reaching out to a professional garage door repair service.
Resetting your garage door keypad code is a simple task that enhances the security of your home. By following these steps, you can easily change your code whenever needed. Remember, if you ever have any trouble or prefer professional assistance, don’t hesitate to contact our expert team at HTX Garage Door. We’re here to help with all your garage door needs!